Aluminum Salt Slag Centrifuge Solutions
for Washing & Solid-Liquid Separation
From washing to salt recovery – continuous, chloride-resistant, and low-moisture separation for aluminum salt slag.
Who am I?
Aluminum Salt Slag Solid-Liquid Separation Equipment Supplier.
What do you solve?
Solid-liquid separation of Aluminum Salt Slag.
What is your core value?
Continuous, chlorine-corrosion-resistant,
low-moisture solids-phase separation.
Continuous
Operation
Chloride Corrosion
Resistance
Continuous Dewatering
& Low Moisture
Customized Screen & Low Fine Slag Loss
Salt Recovery & Slag Reduction
The Critical Separation Stage in Aluminum Salt Slag Processing
Aluminum salt slag — a secondary-smelting byproduct (NaCl–KCl flux) of metallic Al, alumina, chlorides, and AlN. After water-wash leaching, separation splits solids from salt liquor: salt recycles via crystallization, residue to disposal/recovery. The centrifuge drives salt recovery, residue moisture, treatment cost.
Why Separation
Performance Matters？
In aluminum salt slag resource recovery, the centrifuge does more than “separate the slag from the liquid” — it also affects residue moisture, salt entrainment, salt solution recovery, evaporation-crystallization load, and disposal cost.
High Moisture
Wet residue raises downstream disposal or resource-recovery cost.
Fine Slag Loss
Fine slag lost with salt liquor reduces solids recovery and contaminates the salt solution.
Chloride Corrosion
High chloride causes pitting corrosion — shortening equipment life.
AlN Hydrolysis
AlN hydrolyzes in water, releasing ammonia — oxygen monitoring or nitrogen purge needed.
One Process. Two Separation Solutions.
For varying slurry concentrations and process fluctuations after aluminum salt slag water-wash leaching, two continuous separation options are offered: LWL and LWLZ.
LWL
Centrifugal Filtration
Screen Separation
Screw Differential Conveying
Medium-particle, high-throughput ammonium sulfate crystal slurry conditions.
Which one
fits your
process?
LWLZ
Sedimentation Thickening
Screen Filtration
Fine-particle ammonium sulfate slurry requiring lower moisture.
LWL Horizontal Screen Scroll Centrifuge
Continuous solid-liquid separator for aluminum salt slag — screw-push discharge, medium particles, high throughput.
Corrosion-resistant Materials
Main parts—bowl, screw, etc. can be made of corrosion-resistant stainless steel or titanium alloy.
Filtration Screen
Dedicated filtration screen, 0.5mm thick—longer service life.
Adjustable Differential
Bowl speed is steplessly adjustable; screw differential speed adjustable in steps or steplessly.
Circulating Lubrication
Simple, reliable circulating lubrication — with pressure regulation, oil filtration, and water cooling.
Safety Protection
Speed, over-vibration, motor overload / overheat, and zero-differential protection.
LWL Series
LWLZ Horizontal Screen Decanter Centrifuge
Gravity discharge — solids slide down the conical bowl under centrifugal force: longer residence,
better deliquoring; ideal for fine ammonium sulfate slurry.
Gravity Discharge
Gravity discharge — minimal crystal breakage.
Deliquoring
Longer residence and deliquoring time — lower discharge moisture.
Fine Particles
Suited to fine-particle ammonium sulfate slurry.
Bowl Cone Angle
Bowl cone angle optimized at 25° for gravity-slide discharge.
Screen Slotting
Optimized screen slots improve fine-crystal retention.
LWLZ Series
LWL or LWLZ?
How to choose the right centrifuge for your aluminum salt slag?
| Comparison Criteria | LWL | LWLZ |
|---|---|---|
| Discharge Method | Screw-push Discharge | Gravity Discharge (screw-assisted distribution) |
| Suitable Particle Size | Medium Particles | Fine Particles |
| Throughput | High Throughput | Slightly Lower Than LWL At The Same Spec |
| Discharge Moisture | Relatively Low | Lower |
| Particle Breakage | Minimal | Even Less |
| Typical Applications | High-capacity Continuous Production | Fine particles, Low Moisture Requirement |
Not sure which model?
Send us your slurry conditions and our engineers will recommend a suitable configuration.
Customized for Your Aluminum Salt Slag Process
Custom configuration for aluminum salt slag conditions.
Material Options
304/316L/2205 / Titanium / Hastelloy /Zirconium.
Customized Screen
Laser Screen /Slotted Screen.
Motor Options
Different Brands / Efficiency / Explosion-proof.
Control System
VFD / PLC / Explosion-proof Cabinet.
Drum Configuration
Different Cone Angles.
Feed System
Pipe Feed / Screw Conveyor Feed.
Safety Protection
Vibration / Temperature Monitoring.
Nitrogen Protection
Oxygen Monitoring / Nitrogen Protection.
Applications in Aluminum Salt Slag Recycling & Related Industries
From leaching slurry separation to salt recovery and residue reduction — a complete resource-recovery solution for secondary aluminum salt slag.
Secondary Aluminum Salt Slag Recycling
Aluminum Dross & Slag Treatment
Salt Flux Recovery
Hazardous & Solid Waste Treatment
Resource-based Building Materials
Why Choose Our Aluminum Salt Slag Centrifuge Solutions?
Jiangsu Blovebird Centrifuge Manufacturing Co., Ltd. — ISO 9001:2015 certified, National High-Tech Enterprise, Suzhou Gazelle Enterprise, with 30+ utility model patents and 12+ invention patents.
High Mother Liquor Discharge
Efficiency
Dedicated screen filtration matched to crystal size — fast liquor drainage, effective crystal retention.
Better Solids Deliquoring
LWL: screw-push deliquoring, high capacity. LWLZ: gravity discharge, lower moisture — for fines.
Lower Fine-crystal Loss
Screen matched to crystal size and hardness — balances drainage, retention, and throughput.
Continuous Stable Operation
Continuous operation for crystallization lines; two models balance capacity and deliquoring.
Material-specific Customization
Configurable: model, screen, wear treatment, material, speed, differential, cone angle, feed, motor, safety.
Aluminum Salt Slag Application Cases
A Jiangsu Secondary Aluminum Resource
Process Material：Aluminum Salt Slag；Model：LWL630；Capacity：12t/h；Moisture Content：Approx. 12.5%.
A Shandong Solid Waste Recovery Tech
Process Material：Aluminum Salt Slag；Model：LWLZ450；Capacity：4t/h；Moisture Content：Approx. 10.8%.
A Sichuan Environmental Technology
Process Material：Aluminum Salt Slag；Model：LWL350；Capacity：2.5t/h；Moisture Content：Approx. 13.8%.
30 Year Brand
A Number of National Patents
Contact Us
Know More