The ultimate solution for salt extraction with MVR+ triple-effect evaporation 

liquid content of centrifuge is less than 1%, and drying cost is reduced by 90%!

"The liquid content of traditional centrifuges is 5%-8%, which causes a surge in drying energy consumption: an additional 200kW·h is consumed per ton of salt, and the annual loss exceeds one million!"

Case warning: Due to excessive water content in salt slag at a chemical plant, the production capacity of the drying line dropped by 40%.

02 Technical Solution Disassembly

Three-level energy efficiency superposition system：

MVR section：Steam is recycled, and the energy consumption is only 30% of that of multi-effect evaporation.

Three-effect evaporation section：Gradient temperature controlled crystallization produces high-purity salt particles with a particle size of 0.5-1mm.

Centrifuge section：

• Titanium alloy screen + dual motor drive(3800r/min).

• Moisture<3%(Attached with third party test report).

• Salt residue can be packaged directly without drying process.

Measured data：

03 Scenario Case

Achievements of a salt lake lithium extraction enterprise：

• After centrifugation, the liquid content of sodium sulfate is 0.68%, saving the investment of ¥3.8 million in drying equipment.

• Annual savings in steam costs: ¥6.7 million. 

04 Conversion Tool

Liquid fraction simulator：Input salt type (sodium chloride/lithium sulfate) → predict liquid content and energy saving value.

Limited time guarantee：

• A "Liquid Content Meet Standard Commitment Letter" will be given upon signing the contract, and a full refund will be given if it does not reach 1%.

• The first 30 people will receive a free test on the moisture content of salt residue (worth ¥8,000).